Industrial roller shutters in Wick

In short

Replacing a tired shutter in Wick, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Wick
Postcode district: KW1
Area: Highlands and Islands
Survey: By arrangement

What to specify

Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Manual override. If the power fails, the shutter can still be wound open by hand.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.

What this work can involve

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Who is responsible for door safety at a site in Wick?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for industrial roller shutters in Wick

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Wick, travel and access costs are added and shown in your written quote.

Industrial roller shutters in Wick: your questions

Can you supply security-rated shutters in Wick?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Do you remove old shutters at sites in Wick?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Do you repair roller shutters across the Highlands and Islands?

Yes. We repair most makes of roller shutter across the Highlands and Islands, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters: other towns we cover

We take on work in Wick (KW1) by arrangement; timing depends on travel and access, and any extra costs are set out in your quote before you commit.

Other services in Wick

More about Industrial roller shutters · industrial doors in Wick. Last updated 19 October 2026.