Industrial roller shutters in Sandown

The short version

Replacing a tired shutter in Sandown, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Sandown
Postcode district: PO36
Area: Isle of Wight
Survey: By arrangement

What we fit in Sandown

Manual override. If the power fails, the shutter can still be wound open by hand.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.

What this work can involve

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Safety law for industrial doors in England

Industrial doors in Sandown are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Sites in and around Sandown vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Sandown, travel and access costs are added and shown in your written quote.

Frequently asked questions

Can you convert our manual shutter in Sandown to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Sandown site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you repair roller shutters across the Isle of Wight?

Yes. We repair most makes of roller shutter across the Isle of Wight, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters: other towns we cover

We take on work in Sandown (PO36) by arrangement; timing depends on travel and access, and any extra costs are set out in your quote before you commit.

Other services in Sandown

More about Industrial roller shutters · industrial doors in Sandown. Last updated 19 October 2026.