Sectional overhead doors in Sandown

The short version

We can install sectional overhead doors in Sandown and across the Isle of Wight, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Sandown
Postcode district: PO36
Area: Isle of Wight
Survey: By arrangement

What we fit in Sandown

Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.

Typical scopes of work

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.

Who is responsible for door safety at a site in Sandown?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Sandown, travel and access costs are added and shown in your written quote.

Frequently asked questions

Can you replace a roller shutter with a sectional door at our Sandown unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Do you service sectional doors in the Isle of Wight?

Yes. We service and repair most makes of sectional door across the Isle of Wight, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

How much is a sectional overhead door in Sandown?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Sandown is confirmed in writing after a free survey.

Sectional overhead doors: other towns we cover

Sandown (PO36) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Sandown

More about Sectional overhead doors · industrial doors in Sandown. Last updated 19 October 2026.