At a glance
Sectional overhead doors for warehouses, workshops and loading bays in Wiltshire. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.
- Area
- Wiltshire
- Nation
- England
- Main town
- Swindon
- Survey
- Free for new installations
Options that matter on site
- Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.
- Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
- Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
- Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
- Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Typical scopes of work
- Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
- Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
- Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Powered door rules that apply in Wiltshire
Wiltshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Wiltshire
Which safety devices does a powered sectional door in Wiltshire need?
That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.
How much is a sectional overhead door in Wiltshire?
Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Wiltshire is confirmed in writing after a free survey.
Do you survey sites in Wiltshire before quoting?
Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.
Towns in Wiltshire we cover
We cover 4 towns in Wiltshire for sectional overhead doors, including Swindon, Salisbury, Trowbridge, Chippenham.
Other services in Wiltshire
- Industrial roller shutters
- Cold store and freezer doors
- Planned maintenance contracts
- Insulated roller shutter doors
- Dock leveller and loading bay repairs
- Complete loading bays
- Fire shutter servicing and drop tests
- Sliding and folding industrial doors
More about Sectional overhead doors. Last updated 19 October 2026.