Industrial door replacement in Sandown

Quick answer

Industrial door replacement in Sandown: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Town: Sandown
Postcode district: PO36
Area: Isle of Wight
Survey: By arrangement

What we fit in Sandown

Opening repairs. Any damage to the opening is put right so the new door fixes securely.
Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Disposal. Old doors taken away for recycling or disposal.
Free survey. We inspect the old door and measure the opening at no cost before quoting.

Jobs we can carry out

Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.

Powered door rules that apply in Sandown

Sandown is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Guide prices apply to mainland UK sites. For Sandown, travel and access costs are added and shown in your written quote.

Industrial door replacement in Sandown: your questions

Should we repair or replace our door in Sandown?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Do you replace doors at multiple sites across the Isle of Wight?

Yes. We replace doors across the Isle of Wight, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

Can we change door type when replacing at our Sandown unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement: other towns we cover

Sandown (PO36) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Sandown

More about Industrial door replacement · industrial doors in Sandown. Last updated 19 October 2026.