At a glance
Old springs, corroded guides and obsolete motors make some doors in Wiltshire hard to keep running. A planned replacement avoids the next breakdown and leaves you with a door that suits how you work now.
- Area
- Wiltshire
- Nation
- England
- Main town
- Swindon
- Survey
- Free for new installations
What to specify
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
- Free survey. Existing door, opening and space assessed free of charge.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Right door type. Replace with the same type or move to a door that suits your current needs.
Typical scopes of work
- Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
- Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Powered door rules that apply in Wiltshire
Wiltshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Sites in and around Wiltshire vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices for industrial door replacement
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does industrial door replacement cost in Wiltshire?
Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Wiltshire.
Do you take the old door away from our Wiltshire site?
Yes. Strip-out includes removing the old door, springs, guides and drive from site for recycling or disposal. It is priced as a separate line in the quote so you can see exactly what removal costs.
Can we change door type when replacing at our Wiltshire unit?
Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.
Towns in Wiltshire we cover
We cover 4 towns in Wiltshire for industrial door replacement, including Swindon, Salisbury, Trowbridge, Chippenham.
Other services in Wiltshire
- Steel personnel and fire exit doors
- Industrial door repairs
- Dock levellers
- Impact traffic doors
- Bollards and door protection
- PVC strip curtains
- Sectional overhead doors
- Planned maintenance contracts
More about Industrial door replacement. Last updated 19 October 2026.