The short version
Each steel door project in Wiltshire starts with a free survey of the opening, escape route and security needs, followed by a written fixed price before any work starts on site.
- Area
- Wiltshire
- Nation
- England
- Main town
- Swindon
- Survey
- Free for new installations
What we fit in Wiltshire
- Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
- Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
- Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
- Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
- Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Jobs we can carry out
- Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
- Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.
- Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Door rules for workplaces in England
Doors in Wiltshire workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.
Planning the work around your site
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices for steel personnel and fire exit doors
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about steel personnel and fire exit doors
How long does it take to replace a steel door in Wiltshire?
Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.
How much is a steel personnel door in Wiltshire?
Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Wiltshire premises in writing after a free survey.
Can you fit fire-rated steel doors in Wiltshire?
Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.
Towns in Wiltshire we cover
We cover 4 towns in Wiltshire for steel personnel and fire exit doors, including Swindon, Salisbury, Trowbridge, Chippenham.
Other services in Wiltshire
- Sliding and folding industrial doors
- Complete loading bays
- Dock levellers
- PVC strip curtains
- Sectional overhead doors
- Dock leveller and loading bay repairs
- Bollards and door protection
- Insulated roller shutter doors
More about Steel personnel and fire exit doors. Last updated 19 October 2026.