Quick answer
Old springs, corroded guides and obsolete motors make some doors in the Isle of Wight hard to keep running. A planned replacement avoids the next breakdown and leaves you with a door that suits how you work now.
- Area
- Isle of Wight
- Nation
- England
- Main town
- Newport (Isle of Wight)
- Survey
- By arrangement
Options for industrial door replacement in the Isle of Wight
- Opening repairs. Any damage to the opening is put right so the new door fixes securely.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Free survey. We inspect the old door and measure the opening at no cost before quoting.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Typical scopes of work
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
- Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
- Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Safety law for industrial doors in England
Industrial doors in the Isle of Wight are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for industrial door replacement in the Isle of Wight
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Guide prices apply to mainland UK sites. For the Isle of Wight, travel and access costs are added and shown in your written quote.
Frequently asked questions
Should we repair or replace our door in the Isle of Wight?
If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.
Is the survey free for door replacement in the Isle of Wight?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
How long will our opening in the Isle of Wight be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Towns in the Isle of Wight we cover
We cover 4 towns in the Isle of Wight for industrial door replacement, including Newport (Isle of Wight), Ryde, Cowes, Sandown. Island and remote sites are covered by arrangement.
Other services in the Isle of Wight
- Industrial door repairs
- Door safety upgrades
- Dock leveller and loading bay repairs
- Industrial door installation
- Industrial roller shutters
- Hangar and large-span doors
- Cold store and freezer doors
- Steel personnel and fire exit doors
More about Industrial door replacement. Last updated 19 October 2026.