Industrial roller shutters in Herne Bay

The short version

We can fit new steel roller shutters and replace old, damaged ones in Herne Bay and across Kent, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Herne Bay
Postcode district: CT6
Area: Kent
Survey: Free for new installations

What to specify

Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

Jobs we can carry out

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Who is responsible for door safety at a site in Herne Bay?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

For busy sites in Kent the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for industrial roller shutters in Herne Bay

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Herne Bay

How quickly can a roller shutter be fitted in Herne Bay?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Does an electric roller shutter at our Herne Bay site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Herne Bay?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Herne Bay, we confirm a fixed price for your opening in writing.

Industrial roller shutters near Herne Bay

Our teams cover Herne Bay (CT6) and nearby Whitstable, Canterbury, Faversham, along with the rest of Kent.

Other services in Herne Bay

More about Industrial roller shutters · industrial doors in Herne Bay. Last updated 19 October 2026.