Industrial roller shutters in Ormskirk

The short version

From bin stores to goods-in openings, we can install industrial roller shutters at premises in Ormskirk, set up powered shutters to BS EN 12453 and leave you with the paperwork for your files.

Town: Ormskirk
Postcode district: L39
Area: Lancashire
Survey: Free for new installations

What we fit in Ormskirk

Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual override. If the power fails, the shutter can still be wound open by hand.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

Examples of work we can quote for

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Powered door rules that apply in Ormskirk

Ormskirk is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Ormskirk to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Ormskirk site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Ormskirk?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Ormskirk

Besides Ormskirk, we can survey and quote for sites in Maghull, Skelmersdale, Kirkby and the rest of Lancashire.

Other services in Ormskirk

More about Industrial roller shutters · industrial doors in Ormskirk. Last updated 19 October 2026.