Industrial roller shutters in Maghull

In short

Industrial roller shutters for warehouses, yards, workshops and stores in Maghull. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Maghull
Postcode district: L31
Area: Merseyside
Survey: Free for new installations

What we fit in Maghull

Manual override. Powered shutters keep a chain or handle override so they open without power.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

Typical scopes of work

Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Who is responsible for door safety at a site in Maghull?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for industrial roller shutters in Maghull

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Maghull site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Maghull?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Maghull to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Maghull

Working in Maghull? We also take on jobs in Kirkby, Ormskirk, Bootle and across Merseyside.

Other services in Maghull

More about Industrial roller shutters · industrial doors in Maghull. Last updated 19 October 2026.