Industrial roller shutters in Stamford

In short

Roller shutters are a practical choice for sites in Stamford (PE9): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Stamford
Postcode district: PE9
Area: Lincolnshire
Survey: Free for new installations

Options for industrial roller shutters in Stamford

Manual override. If the power fails, the shutter can still be wound open by hand.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.

What this work can involve

Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Powered door rules that apply in Stamford

Stamford is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

For busy sites in Lincolnshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Budgeting for industrial roller shutters in Stamford

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Stamford

Can you convert our manual shutter in Stamford to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Stamford site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Stamford?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Stamford

Besides Stamford, we can survey and quote for sites in Ketton, Oakham, Uppingham and the rest of Lincolnshire.

Other services in Stamford

More about Industrial roller shutters · industrial doors in Stamford. Last updated 19 October 2026.