Industrial roller shutters in Uppingham

At a glance

Roller shutters are a practical choice for sites in Uppingham (LE15): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Uppingham
Postcode district: LE15
Area: Rutland
Survey: Free for new installations

What to specify

Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.

Typical scopes of work

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Who is responsible for door safety at a site in Uppingham?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for industrial roller shutters in Uppingham

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Uppingham to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How much is an industrial roller shutter in Uppingham?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Uppingham, we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Uppingham site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Uppingham

Besides Uppingham, we can survey and quote for sites in Oakham, Corby, Ketton and the rest of Rutland.

Other services in Uppingham

More about Industrial roller shutters · industrial doors in Uppingham. Last updated 19 October 2026.