Industrial roller shutters in Maesteg

In short

Need a tough, space-saving door for a unit in Maesteg? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: Maesteg
Postcode district: CF34
Area: Mid Glamorgan
Survey: Free for new installations

What to specify

Manual override. If the power fails, the shutter can still be wound open by hand.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

What this work can involve

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Maesteg?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Maesteg: your questions

Do you remove old shutters at sites in Maesteg?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Maesteg to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you repair roller shutters across Mid Glamorgan?

Yes. We repair most makes of roller shutter across Mid Glamorgan, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Industrial roller shutters near Maesteg

Working in Maesteg? We also take on jobs in Port Talbot, Neath, Bridgend and across Mid Glamorgan.

Other services in Maesteg

More about Industrial roller shutters · industrial doors in Maesteg. Last updated 19 October 2026.