Industrial roller shutters in Norwich

In short

Industrial roller shutters for warehouses, yards, workshops and stores in Norwich. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Norwich
Postcode district: NR2
Area: Norfolk
Survey: Free for new installations

What we fit in Norwich

Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Manual override. If the power fails, the shutter can still be wound open by hand.

Typical scopes of work

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Who is responsible for door safety at a site in Norwich?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Norwich

Do you remove old shutters at sites in Norwich?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Does an electric roller shutter at our Norwich site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you supply security-rated shutters in Norwich?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Industrial roller shutters near Norwich

Our teams cover Norwich (NR2) and nearby Great Yarmouth, Lowestoft, Thetford, along with the rest of Norfolk.

Other services in Norwich

More about Industrial roller shutters · industrial doors in Norwich. Last updated 19 October 2026.