Industrial roller shutters in West Bromwich

The short version

Replacing a tired shutter in West Bromwich, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: West Bromwich
Postcode district: B70
Area: West Midlands
Survey: Free for new installations

What to specify

Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Typical scopes of work

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Safety law for industrial doors in England

Industrial doors in West Bromwich are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for industrial roller shutters in West Bromwich

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in West Bromwich: your questions

Does an electric roller shutter at our West Bromwich site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in West Bromwich?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in West Bromwich?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near West Bromwich

Working in West Bromwich? We also take on jobs in Smethwick, Wednesbury, Tipton and across the West Midlands.

Other services in West Bromwich

More about Industrial roller shutters · industrial doors in West Bromwich. Last updated 19 October 2026.