Industrial roller shutters in Worthing

Quick answer

Replacing a tired shutter in Worthing, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Worthing
Postcode district: BN11
Area: West Sussex
Survey: Free for new installations

What we fit in Worthing

Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.

Jobs we can carry out

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Safety law for industrial doors in England

Industrial doors in Worthing are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in Worthing: your questions

Does an electric roller shutter at our Worthing site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Worthing?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Worthing to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Worthing

Besides Worthing, we can survey and quote for sites in Littlehampton, Hove, Brighton and the rest of West Sussex.

Other services in Worthing

More about Industrial roller shutters · industrial doors in Worthing. Last updated 19 October 2026.