Industrial roller shutters in Bognor Regis

At a glance

Need a tough, space-saving door for a unit in Bognor Regis? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: Bognor Regis
Postcode district: PO21
Area: West Sussex
Survey: Free for new installations

Options for industrial roller shutters in Bognor Regis

Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Manual override. If the power fails, the shutter can still be wound open by hand.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
Colour finishes. Leave it galvanised or choose a colour that matches the building.

Typical scopes of work

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Who is responsible for door safety at a site in Bognor Regis?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you remove old shutters at sites in Bognor Regis?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Do you repair roller shutters across West Sussex?

Yes. We repair most makes of roller shutter across West Sussex, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Does an electric roller shutter at our Bognor Regis site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Bognor Regis

Bognor Regis is in the PO21 postcode district in West Sussex. We also cover Chichester, Littlehampton, Worthing.

Other services in Bognor Regis

More about Industrial roller shutters · industrial doors in Bognor Regis. Last updated 19 October 2026.