Industrial roller shutters in Dewsbury

At a glance

Industrial roller shutters for warehouses, yards, workshops and stores in Dewsbury. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Dewsbury
Postcode district: WF12
Area: West Yorkshire
Survey: Free for new installations

Options for industrial roller shutters in Dewsbury

Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual override. If the power fails, the shutter can still be wound open by hand.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.

Typical scopes of work

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Who is responsible for door safety at a site in Dewsbury?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for industrial roller shutters in Dewsbury

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Dewsbury site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you supply security-rated shutters in Dewsbury?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

How quickly can a roller shutter be fitted in Dewsbury?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near Dewsbury

Our teams cover Dewsbury (WF12) and nearby Batley, Ossett, Morley, along with the rest of West Yorkshire.

Other services in Dewsbury

More about Industrial roller shutters · industrial doors in Dewsbury. Last updated 19 October 2026.