Industrial roller shutters in Redditch

The short version

Need a tough, space-saving door for a unit in Redditch? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: Redditch
Postcode district: B97
Area: Worcestershire
Survey: Free for new installations

What to specify

Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.

Typical scopes of work

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Who is responsible for door safety at a site in Redditch?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Redditch site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Redditch?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you supply security-rated shutters in Redditch?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Industrial roller shutters near Redditch

Besides Redditch, we can survey and quote for sites in Bromsgrove, Shirley, Droitwich and the rest of Worcestershire.

Other services in Redditch

More about Industrial roller shutters · industrial doors in Redditch. Last updated 19 October 2026.