Insulated roller shutter doors in Bedfordshire

The short version

Replacing a draughty roller shutter in Bedfordshire? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Area: Bedfordshire
Nation: England
Main town: Luton
Survey: Free for new installations

What to specify

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.

Jobs we can carry out

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Who is responsible for door safety at a site in Bedfordshire?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Budgeting for insulated roller shutter doors in Bedfordshire

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you repair insulated roller doors across the East of England?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across the East of England. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Does a powered insulated roller door in Bedfordshire need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Bedfordshire with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Towns in Bedfordshire we cover

We cover 5 towns in Bedfordshire for insulated roller shutter doors, including Luton, Bedford, Dunstable, Leighton Buzzard.

Other services in Bedfordshire

More about Insulated roller shutter doors. Last updated 19 October 2026.