Quick answer
Tight headroom, cluttered ceiling, still need a warm door? For units in Dunstable (LU6), we can install insulated roller doors that coil neatly above the opening and leave the roof space completely clear.
- Town
- Dunstable
- Postcode district
- LU6
- Area
- Bedfordshire
- Survey
- Free for new installations
What we fit in Dunstable
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Jobs we can carry out
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Powered door rules that apply in Dunstable
Dunstable is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for insulated roller shutter doors
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Insulated roller shutter doors in Dunstable: your questions
How much does an insulated roller shutter door cost in Dunstable?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Dunstable opening free of charge and then put a fixed price in writing.
Do you repair insulated roller doors across Bedfordshire?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Bedfordshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
How long does insulated roller door installation take in Dunstable?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Insulated roller shutter doors near Dunstable
Our teams cover Dunstable (LU6) and nearby Luton, Leighton Buzzard, Harpenden, along with the rest of Bedfordshire.
- Insulated roller shutter doors in Luton
- Insulated roller shutter doors in Leighton Buzzard
- Insulated roller shutter doors in Harpenden
- Insulated roller shutter doors in Berkhamsted
- Insulated roller shutter doors in Hemel Hempstead
- Insulated roller shutter doors in Ampthill
Other services in Dunstable
- Fire shutters
- Complete loading bays
- Planned maintenance contracts
- Sliding and folding industrial doors
- Industrial door repairs
- Industrial roller shutters
- Impact traffic doors
- Door automation and controls
More about Insulated roller shutter doors · industrial doors in Dunstable. Last updated 19 October 2026.