The short version
Insulated roller doors suit premises in Wrexham that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.
- Town
- Wrexham
- Postcode district
- LL13
- Area
- Clwyd
- Survey
- Free for new installations
Options for insulated roller shutter doors in Wrexham
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Electric drive. Tubular or external geared motors with a manual override for power cuts.
- Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
What this work can involve
- Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Who is responsible for door safety at a site in Wrexham?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
For busy sites in Clwyd the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Prices for insulated roller shutter doors in Wrexham
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Insulated roller shutter doors in Wrexham: your questions
How much does an insulated roller shutter door cost in Wrexham?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Wrexham opening free of charge and then put a fixed price in writing.
Can you replace our old roller shutter in Wrexham with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Will an insulated roller door cut heating bills at our Wrexham premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Insulated roller shutter doors near Wrexham
Working in Wrexham? We also take on jobs in Buckley, Mold, Connah's Quay and across Clwyd.
- Insulated roller shutter doors in Buckley
- Insulated roller shutter doors in Mold
- Insulated roller shutter doors in Connah's Quay
- Insulated roller shutter doors in Flint
- Insulated roller shutter doors in Welshpool
- Insulated roller shutter doors in Rhyl
Other services in Wrexham
- Industrial door installation
- Door automation and controls
- Sliding and folding industrial doors
- Planned maintenance contracts
- Complete loading bays
- PVC strip curtains
- Hangar and large-span doors
- Dock leveller and loading bay repairs
More about Insulated roller shutter doors · industrial doors in Wrexham. Last updated 19 October 2026.