In short
We can fit foam-filled insulated roller doors in Falmouth and across Cornwall, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.
- Town
- Falmouth
- Postcode district
- TR11
- Area
- Cornwall
- Survey
- Free for new installations
What to specify
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Typical scopes of work
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Who is responsible for door safety at a site in Falmouth?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
For busy sites in Cornwall the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Prices for insulated roller shutter doors in Falmouth
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you replace our old roller shutter in Falmouth with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Do you repair insulated roller doors across Cornwall?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Cornwall. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Is there enough headroom for an insulated roller door at our Falmouth unit?
The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.
Insulated roller shutter doors near Falmouth
Working in Falmouth? We also take on jobs in Truro, Redruth, Camborne and across Cornwall.
- Insulated roller shutter doors in Truro
- Insulated roller shutter doors in Redruth
- Insulated roller shutter doors in Camborne
- Insulated roller shutter doors in Newquay
- Insulated roller shutter doors in St Austell
- Insulated roller shutter doors in Plymouth
Other services in Falmouth
- Steel personnel and fire exit doors
- Industrial door replacement
- Bollards and door protection
- Cold store and freezer doors
- Impact traffic doors
- Door safety upgrades
- Sliding and folding industrial doors
- Fire shutters
More about Insulated roller shutter doors · industrial doors in Falmouth. Last updated 19 October 2026.