In short
Older door control panels may not accept modern monitored safety devices. At premises in Falmouth, we can replace them where needed, adding inverter control and better fault diagnostics in the same visit.
- Town
- Falmouth
- Postcode district
- TR11
- Area
- Cornwall
- Survey
- Free for new installations
What we fit in Falmouth
- Light curtains. Full-height multi-beam detection across the whole opening.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Records. Written results and updated risk assessment for your files.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Photocells. Beams across the opening that stop the door closing while broken.
What this work can involve
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Powered door rules that apply in Falmouth
Falmouth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for door safety upgrades in Falmouth
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Falmouth
How much does a door safety upgrade cost in Falmouth?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Falmouth.
Will a safety upgrade at our Falmouth premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Our door at our Falmouth site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Falmouth
Besides Falmouth, we can survey and quote for sites in Truro, Redruth, Camborne and the rest of Cornwall.
- Door safety upgrades in Truro
- Door safety upgrades in Redruth
- Door safety upgrades in Camborne
- Door safety upgrades in Newquay
- Door safety upgrades in St Austell
- Door safety upgrades in Plymouth
Other services in Falmouth
- Fire shutters
- Complete loading bays
- Industrial door replacement
- Dock leveller and loading bay repairs
- Impact traffic doors
- Fire shutter servicing and drop tests
- Industrial door installation
- Cold store and freezer doors
More about Door safety upgrades · industrial doors in Falmouth. Last updated 19 October 2026.
