Insulated roller shutter doors in Hull

Quick answer

Replacing a draughty roller shutter in Hull? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Hull
Postcode district: HU1
Area: East Riding of Yorkshire
Survey: Free for new installations

Options that matter on site

Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.

Typical scopes of work

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.

Who is responsible for door safety at a site in Hull?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Sites in and around Hull vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for insulated roller shutter doors in Hull

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Hull: your questions

Can you replace our old roller shutter in Hull with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Is there enough headroom for an insulated roller door at our Hull unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Will an insulated roller door cut heating bills at our Hull premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Insulated roller shutter doors near Hull

Besides Hull, we can survey and quote for sites in Beverley, Grimsby, Scunthorpe and the rest of the East Riding of Yorkshire.

Other services in Hull

More about Insulated roller shutter doors · industrial doors in Hull. Last updated 19 October 2026.