Insulated roller shutter doors in Scunthorpe

The short version

Insulated roller doors suit premises in Scunthorpe that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Scunthorpe
Postcode district: DN15
Area: Lincolnshire
Survey: Free for new installations

Options that matter on site

Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.

Jobs we can carry out

Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Scunthorpe?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Scunthorpe: your questions

Will an insulated roller door cut heating bills at our Scunthorpe premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Is there enough headroom for an insulated roller door at our Scunthorpe unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Do you repair insulated roller doors across Lincolnshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Lincolnshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Insulated roller shutter doors near Scunthorpe

Working in Scunthorpe? We also take on jobs in Goole, Gainsborough, Hull and across Lincolnshire.

Other services in Scunthorpe

More about Insulated roller shutter doors · industrial doors in Scunthorpe. Last updated 19 October 2026.