At a glance
Replacing a draughty roller shutter in Billericay? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Billericay
- Postcode district
- CM12
- Area
- Essex
- Survey
- Free for new installations
What to specify
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
What this work can involve
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Who is responsible for door safety at a site in Billericay?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.
Prices for insulated roller shutter doors in Billericay
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Billericay
Can you replace our old roller shutter in Billericay with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
How much does an insulated roller shutter door cost in Billericay?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Billericay opening free of charge and then put a fixed price in writing.
How long does insulated roller door installation take in Billericay?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Insulated roller shutter doors near Billericay
Billericay is in the CM12 postcode district in Essex. We also cover Basildon, Wickford, Brentwood.
- Insulated roller shutter doors in Basildon
- Insulated roller shutter doors in Wickford
- Insulated roller shutter doors in Brentwood
- Insulated roller shutter doors in Stanford-le-Hope
- Insulated roller shutter doors in Chelmsford
- Insulated roller shutter doors in South Benfleet
Other services in Billericay
- Fire shutters
- Cold store and freezer doors
- Bollards and door protection
- Hangar and large-span doors
- Dock levellers
- Sectional overhead doors
- Door safety upgrades
- PVC strip curtains
More about Insulated roller shutter doors · industrial doors in Billericay. Last updated 19 October 2026.