Insulated roller shutter doors in Coulsdon

In short

Replacing a draughty roller shutter in Coulsdon? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Coulsdon
Postcode district: CR5
Area: Greater London
Survey: Free for new installations

What we fit in Coulsdon

Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.

Typical scopes of work

Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.

Who is responsible for door safety at a site in Coulsdon?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Coulsdon: your questions

Does a powered insulated roller door in Coulsdon need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Will an insulated roller door cut heating bills at our Coulsdon premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Do you repair insulated roller doors across Greater London?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Greater London. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Insulated roller shutter doors near Coulsdon

Working in Coulsdon? We also take on jobs in Purley, Banstead, Wallington and across Greater London.

Other services in Coulsdon

More about Insulated roller shutter doors · industrial doors in Coulsdon. Last updated 19 October 2026.