At a glance
Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Surrey. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.
- Area
- Surrey
- Nation
- England
- Main town
- Guildford
- Survey
- Free for new installations
What we fit in Surrey
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
- Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
- Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Examples of work we can quote for
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Powered door rules that apply in Surrey
Surrey is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
Most installations in Surrey can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Budgeting for insulated roller shutter doors in Surrey
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
Does a powered insulated roller door in Surrey need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
How much does an insulated roller shutter door cost in Surrey?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Surrey opening free of charge and then put a fixed price in writing.
Can you replace our old roller shutter in Surrey with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Towns in Surrey we cover
We cover 18 towns in Surrey for insulated roller shutter doors, including Guildford, Woking, Esher, Redhill.
- Guildford
- Woking
- Esher
- Redhill
- Staines-upon-Thames
- Banstead
- Leatherhead
- Farnham
- Epsom
- Camberley
- Egham
- Sunbury-on-Thames
- Ashford (Surrey)
- Walton-on-Thames
- Godalming
- Reigate
- Horley
- Caterham
Other services in Surrey
- Industrial door motor replacement
- Dock shelters and seals
- Hangar and large-span doors
- Planned maintenance contracts
- Steel personnel and fire exit doors
- Door automation and controls
- Industrial door replacement
- Industrial door installation
More about Insulated roller shutter doors. Last updated 19 October 2026.
