Insulated roller shutter doors in Sunbury-on-Thames

At a glance

Replacing a draughty roller shutter in Sunbury-on-Thames? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Sunbury-on-Thames
Postcode district: TW16
Area: Surrey
Survey: Free for new installations

Options for insulated roller shutter doors in Sunbury-on-Thames

Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.

Typical scopes of work

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.

Powered door rules that apply in Sunbury-on-Thames

Sunbury-on-Thames is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Budgeting for insulated roller shutter doors in Sunbury-on-Thames

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you repair insulated roller doors across Surrey?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Surrey. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

How much does an insulated roller shutter door cost in Sunbury-on-Thames?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Sunbury-on-Thames opening free of charge and then put a fixed price in writing.

Does a powered insulated roller door in Sunbury-on-Thames need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Sunbury-on-Thames

Working in Sunbury-on-Thames? We also take on jobs in Walton-on-Thames, Hampton, Hanworth and across Surrey.

Other services in Sunbury-on-Thames

More about Insulated roller shutter doors · industrial doors in Sunbury-on-Thames. Last updated 19 October 2026.