The short version
Replacing a draughty roller shutter in Berkshire? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Area
- Berkshire
- Nation
- England
- Main town
- Reading
- Survey
- Free for new installations
What we fit in Berkshire
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
- Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
- Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
What this work can involve
- Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Powered door rules that apply in Berkshire
Berkshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Sites in and around Berkshire vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
How much does an insulated roller shutter door cost in Berkshire?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Berkshire opening free of charge and then put a fixed price in writing.
Will an insulated roller door cut heating bills at our Berkshire premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Does a powered insulated roller door in Berkshire need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
Towns in Berkshire we cover
We cover 9 towns in Berkshire for insulated roller shutter doors, including Reading, Slough, Bracknell, Maidenhead.
Other services in Berkshire
- Hangar and large-span doors
- Industrial door motor replacement
- Complete loading bays
- Dock levellers
- Industrial door repairs
- Steel personnel and fire exit doors
- Cold store and freezer doors
- PVC strip curtains
More about Insulated roller shutter doors. Last updated 19 October 2026.