At a glance
Replacing a draughty roller shutter in Wokingham? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Wokingham
- Postcode district
- RG40
- Area
- Berkshire
- Survey
- Free for new installations
Options that matter on site
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
- Electric drive. Tubular or external geared motors with a manual override for power cuts.
Typical scopes of work
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Who is responsible for door safety at a site in Wokingham?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Budgeting for insulated roller shutter doors in Wokingham
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Insulated roller shutter doors in Wokingham: your questions
Will an insulated roller door cut heating bills at our Wokingham premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
How long does insulated roller door installation take in Wokingham?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Do you repair insulated roller doors across Berkshire?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Berkshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Insulated roller shutter doors near Wokingham
Besides Wokingham, we can survey and quote for sites in Bracknell, Yateley, Sandhurst and the rest of Berkshire.
- Insulated roller shutter doors in Bracknell
- Insulated roller shutter doors in Yateley
- Insulated roller shutter doors in Sandhurst
- Insulated roller shutter doors in Camberley
- Insulated roller shutter doors in Reading
- Insulated roller shutter doors in Farnborough
Other services in Wokingham
- Hangar and large-span doors
- Sliding and folding industrial doors
- Complete loading bays
- Industrial door repairs
- Dock levellers
- Bollards and door protection
- Industrial door motor replacement
- Fire shutter servicing and drop tests
More about Insulated roller shutter doors · industrial doors in Wokingham. Last updated 19 October 2026.