Industrial door replacement in Sunbury-on-Thames

In short

Is an old door at your Sunbury-on-Thames site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.

Town: Sunbury-on-Thames
Postcode district: TW16
Area: Surrey
Survey: Free for new installations

What we fit in Sunbury-on-Thames

Disposal. Old doors taken away for recycling or disposal.
Commissioning. Each new door is tested and handed over with the documents it needs.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Free survey. We inspect the old door and measure the opening at no cost before quoting.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.

Jobs we can carry out

Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.

Powered door rules that apply in Sunbury-on-Thames

Sunbury-on-Thames is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Sunbury-on-Thames: your questions

Is the survey free for door replacement in Sunbury-on-Thames?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Can we change door type when replacing at our Sunbury-on-Thames unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

How much does industrial door replacement cost in Sunbury-on-Thames?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Sunbury-on-Thames.

Industrial door replacement near Sunbury-on-Thames

Working in Sunbury-on-Thames? We also take on jobs in Walton-on-Thames, Hampton, Hanworth and across Surrey.

Other services in Sunbury-on-Thames

More about Industrial door replacement · industrial doors in Sunbury-on-Thames. Last updated 19 October 2026.