Insulated roller shutter doors in Feltham

At a glance

We can fit foam-filled insulated roller doors in Feltham and across Greater London, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Feltham
Postcode district: TW13
Area: Greater London
Survey: Free for new installations

Options that matter on site

Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.

Typical scopes of work

Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.

Powered door rules that apply in Feltham

Feltham is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How long does insulated roller door installation take in Feltham?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Can you replace our old roller shutter in Feltham with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Will an insulated roller door cut heating bills at our Feltham premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Insulated roller shutter doors near Feltham

Besides Feltham, we can survey and quote for sites in Hanworth, Ashford (Surrey), Hounslow and the rest of Greater London.

Other services in Feltham

More about Insulated roller shutter doors · industrial doors in Feltham. Last updated 19 October 2026.