Insulated roller shutter doors in Woking

The short version

Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Woking. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.

Town: Woking
Postcode district: GU22
Area: Surrey
Survey: Free for new installations

Options for insulated roller shutter doors in Woking

Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.

Jobs we can carry out

Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Woking?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Sites in and around Woking vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Woking

Is there enough headroom for an insulated roller door at our Woking unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Can you replace our old roller shutter in Woking with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

How long does insulated roller door installation take in Woking?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Insulated roller shutter doors near Woking

Woking is in the GU22 postcode district in Surrey. We also cover Guildford, Egham, Walton-on-Thames.

Other services in Woking

More about Insulated roller shutter doors · industrial doors in Woking. Last updated 19 October 2026.