The short version
Large openings at sites in Woking (GU22) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.
- Town
- Woking
- Postcode district
- GU22
- Area
- Surrey
- Survey
- Free for new installations
What we fit in Woking
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
Jobs we can carry out
- Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
- Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
- Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
Who is responsible for door safety at a site in Woking?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Prices for hangar and large-span doors in Woking
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Woking
Can you refurbish our existing hangar doors in Woking?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
How much does a hangar door cost in Woking?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Woking, we confirm a fixed price in writing.
Which hangar door type would suit our building in Woking?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
Hangar and large-span doors near Woking
Working in Woking? We also take on jobs in Guildford, Egham, Walton-on-Thames and across Surrey.
- Hangar and large-span doors in Guildford
- Hangar and large-span doors in Egham
- Hangar and large-span doors in Walton-on-Thames
- Hangar and large-span doors in Camberley
- Hangar and large-span doors in Staines-upon-Thames
- Hangar and large-span doors in Sunbury-on-Thames
Other services in Woking
- Insulated roller shutter doors
- Complete loading bays
- Fire shutters
- Planned maintenance contracts
- Impact traffic doors
- Bollards and door protection
- High-speed doors
- Industrial roller shutters
More about Hangar and large-span doors · industrial doors in Woking. Last updated 19 October 2026.
