Quick answer
Tight headroom, cluttered ceiling, still need a warm door? For units in Epsom (KT17), we can install insulated roller doors that coil neatly above the opening and leave the roof space completely clear.
- Town
- Epsom
- Postcode district
- KT17
- Area
- Surrey
- Survey
- Free for new installations
What we fit in Epsom
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
- Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
- Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
- Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Typical scopes of work
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Safety law for industrial doors in England
Industrial doors in Epsom are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for insulated roller shutter doors in Epsom
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
Do you repair insulated roller doors across Surrey?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Surrey. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Does a powered insulated roller door in Epsom need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
Can you replace our old roller shutter in Epsom with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Insulated roller shutter doors near Epsom
Epsom is in the KT17 postcode district in Surrey. We also cover Banstead, Sutton, Leatherhead.
- Insulated roller shutter doors in Banstead
- Insulated roller shutter doors in Sutton
- Insulated roller shutter doors in Leatherhead
- Insulated roller shutter doors in Surbiton
- Insulated roller shutter doors in New Malden
- Insulated roller shutter doors in Esher
Other services in Epsom
- Bollards and door protection
- Door safety upgrades
- Cold store and freezer doors
- Industrial roller shutters
- Industrial door replacement
- Industrial door motor replacement
- High-speed doors
- Dock shelters and seals
More about Insulated roller shutter doors · industrial doors in Epsom. Last updated 19 October 2026.