Insulated roller shutter doors in New Malden

The short version

Replacing a draughty roller shutter in New Malden? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: New Malden
Postcode district: KT3
Area: Greater London
Survey: Free for new installations

Options that matter on site

Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.

Typical scopes of work

Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.

Who is responsible for door safety at a site in New Malden?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for insulated roller shutter doors in New Malden

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Will an insulated roller door cut heating bills at our New Malden premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Does a powered insulated roller door in New Malden need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in New Malden with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near New Malden

Our teams cover New Malden (KT3) and nearby Surbiton, Kingston upon Thames, Morden, along with the rest of Greater London.

Other services in New Malden

More about Insulated roller shutter doors · industrial doors in New Malden. Last updated 19 October 2026.