Insulated roller shutter doors in Morden

The short version

We can fit foam-filled insulated roller doors in Morden and across Greater London, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Morden
Postcode district: SM4
Area: Greater London
Survey: Free for new installations

What we fit in Morden

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.

Jobs we can carry out

Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Morden?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for insulated roller shutter doors in Morden

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Is there enough headroom for an insulated roller door at our Morden unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

How much does an insulated roller shutter door cost in Morden?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Morden opening free of charge and then put a fixed price in writing.

Does a powered insulated roller door in Morden need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Morden

Working in Morden? We also take on jobs in Mitcham, Wimbledon, Carshalton and across Greater London.

Other services in Morden

More about Insulated roller shutter doors · industrial doors in Morden. Last updated 19 October 2026.