Quick answer
We can supply, install and refurbish large-span doors across Greater London where standard industrial doors stop, from hangars and rail sheds to heavy plant workshops, with a free survey for sites in New Malden.
- Town
- New Malden
- Postcode district
- KT3
- Area
- Greater London
- Survey
- Free for new installations
What to specify
- Safety systems. Edge protection, photocells, warning lights, sounders and interlocks.
- Refurbishment. Older hangar doors renewed with new wheels, guides, drives and cladding.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
Jobs we can carry out
- Fitting a vertical-lift fabric door to a tall vehicle maintenance shed where adjoining buildings take up the side space.
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
- Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.
Who is responsible for door safety at a site in New Malden?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices for hangar and large-span doors
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about hangar and large-span doors
Can you refurbish our existing hangar doors in New Malden?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
Do you service large doors across Greater London?
Yes. We service and repair hangar and large-span doors across Greater London, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
How long would a large-span door installation take in New Malden?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
Hangar and large-span doors near New Malden
New Malden is in the KT3 postcode district in Greater London. We also cover Surbiton, Kingston upon Thames, Morden.
- Hangar and large-span doors in Surbiton
- Hangar and large-span doors in Kingston upon Thames
- Hangar and large-span doors in Morden
- Hangar and large-span doors in Wimbledon
- Hangar and large-span doors in Mitcham
- Hangar and large-span doors in Twickenham
Other services in New Malden
- Industrial door installation
- Industrial door motor replacement
- Fire shutters
- Fire shutter servicing and drop tests
- Planned maintenance contracts
- Impact traffic doors
- Industrial door repairs
- PVC strip curtains
More about Hangar and large-span doors · industrial doors in New Malden. Last updated 19 October 2026.