In short
Replacing a draughty roller shutter in Leatherhead? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Leatherhead
- Postcode district
- KT22
- Area
- Surrey
- Survey
- Free for new installations
What to specify
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Typical scopes of work
- Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Safety law for industrial doors in England
Industrial doors in Leatherhead are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for insulated roller shutter doors in Leatherhead
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Insulated roller shutter doors in Leatherhead: your questions
Do you repair insulated roller doors across Surrey?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Surrey. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
How long does insulated roller door installation take in Leatherhead?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Can you replace our old roller shutter in Leatherhead with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Insulated roller shutter doors near Leatherhead
Working in Leatherhead? We also take on jobs in Epsom, Esher, Banstead and across Surrey.
- Insulated roller shutter doors in Epsom
- Insulated roller shutter doors in Esher
- Insulated roller shutter doors in Banstead
- Insulated roller shutter doors in Surbiton
- Insulated roller shutter doors in Sutton
- Insulated roller shutter doors in Reigate
Other services in Leatherhead
- Cold store and freezer doors
- Bollards and door protection
- PVC strip curtains
- Sliding and folding industrial doors
- Hangar and large-span doors
- Door automation and controls
- Industrial roller shutters
- Industrial door installation
More about Insulated roller shutter doors · industrial doors in Leatherhead. Last updated 19 October 2026.