Insulated roller shutter doors in Putney

Quick answer

Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Putney. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.

Town: Putney
Postcode district: SW15
Area: Greater London
Survey: Free for new installations

What we fit in Putney

Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Electric drive. Tubular or external geared motors with a manual override for power cuts.

Typical scopes of work

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.

Powered door rules that apply in Putney

Putney is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Sites in and around Putney vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Will an insulated roller door cut heating bills at our Putney premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Does a powered insulated roller door in Putney need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Putney with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Putney

Our teams cover Putney (SW15) and nearby Barnes, Fulham, Hammersmith, along with the rest of Greater London.

Other services in Putney

More about Insulated roller shutter doors · industrial doors in Putney. Last updated 19 October 2026.