In short
Replacing a draughty roller shutter in Dover? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Dover
- Postcode district
- CT16
- Area
- Kent
- Survey
- Free for new installations
Options that matter on site
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Typical scopes of work
- Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
- Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Safety law for industrial doors in England
Industrial doors in Dover are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Dover
Does a powered insulated roller door in Dover need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
How long does insulated roller door installation take in Dover?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Will an insulated roller door cut heating bills at our Dover premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Insulated roller shutter doors near Dover
Besides Dover, we can survey and quote for sites in Folkestone, Deal, Canterbury and the rest of Kent.
- Insulated roller shutter doors in Folkestone
- Insulated roller shutter doors in Deal
- Insulated roller shutter doors in Canterbury
- Insulated roller shutter doors in Ramsgate
- Insulated roller shutter doors in Broadstairs
- Insulated roller shutter doors in Margate
Other services in Dover
- Dock levellers
- Industrial door replacement
- Bollards and door protection
- Sliding and folding industrial doors
- Hangar and large-span doors
- Door safety upgrades
- Cold store and freezer doors
- Sectional overhead doors
More about Insulated roller shutter doors · industrial doors in Dover. Last updated 19 October 2026.