Insulated roller shutter doors in Strood

The short version

Replacing a draughty roller shutter in Strood? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Strood
Postcode district: ME2
Area: Kent
Survey: Free for new installations

What to specify

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.

Jobs we can carry out

Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.

Safety law for industrial doors in England

Industrial doors in Strood are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Do you repair insulated roller doors across Kent?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Kent. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Does a powered insulated roller door in Strood need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Strood with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Strood

Our teams cover Strood (ME2) and nearby Rochester, Chatham, Gillingham, along with the rest of Kent.

Other services in Strood

More about Insulated roller shutter doors · industrial doors in Strood. Last updated 19 October 2026.