Quick answer
Replacing a draughty roller shutter in Bridgend? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Bridgend
- Postcode district
- CF31
- Area
- Mid Glamorgan
- Survey
- Free for new installations
What to specify
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Typical scopes of work
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Safety law for industrial doors in Wales
Industrial doors in Bridgend are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Keeping your site running during the work
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
How much does an insulated roller shutter door cost in Bridgend?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Bridgend opening free of charge and then put a fixed price in writing.
Do you repair insulated roller doors across Mid Glamorgan?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Mid Glamorgan. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Is there enough headroom for an insulated roller door at our Bridgend unit?
The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.
Insulated roller shutter doors near Bridgend
Working in Bridgend? We also take on jobs in Maesteg, Port Talbot, Pontypridd and across Mid Glamorgan.
- Insulated roller shutter doors in Maesteg
- Insulated roller shutter doors in Port Talbot
- Insulated roller shutter doors in Pontypridd
- Insulated roller shutter doors in Barry
- Insulated roller shutter doors in Neath
- Insulated roller shutter doors in Aberdare
Other services in Bridgend
- Cold store and freezer doors
- Planned maintenance contracts
- Complete loading bays
- Dock levellers
- Door safety upgrades
- Steel personnel and fire exit doors
- Hangar and large-span doors
- High-speed doors
More about Insulated roller shutter doors · industrial doors in Bridgend. Last updated 19 October 2026.