Insulated roller shutter doors in Bicester

At a glance

Insulated roller doors suit premises in Bicester that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Bicester
Postcode district: OX26
Area: Oxfordshire
Survey: Free for new installations

Options that matter on site

Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.

What this work can involve

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.

Who is responsible for door safety at a site in Bicester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Is there enough headroom for an insulated roller door at our Bicester unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

How much does an insulated roller shutter door cost in Bicester?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Bicester opening free of charge and then put a fixed price in writing.

How long does insulated roller door installation take in Bicester?

Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.

Insulated roller shutter doors near Bicester

Working in Bicester? We also take on jobs in Oxford, Banbury, Aylesbury and across Oxfordshire.

Other services in Bicester

More about Insulated roller shutter doors · industrial doors in Bicester. Last updated 19 October 2026.