At a glance
Insulated roller doors suit premises in Brecon that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.
- Town
- Brecon
- Postcode district
- LD3
- Area
- Powys
- Survey
- Free for new installations
What to specify
- Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Typical scopes of work
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Who is responsible for door safety at a site in Brecon?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does an insulated roller shutter door cost in Brecon?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Brecon opening free of charge and then put a fixed price in writing.
Does a powered insulated roller door in Brecon need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
How long does insulated roller door installation take in Brecon?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Insulated roller shutter doors near Brecon
Our teams cover Brecon (LD3) and nearby Merthyr Tydfil, Ebbw Vale, Aberdare, along with the rest of Powys.
- Insulated roller shutter doors in Merthyr Tydfil
- Insulated roller shutter doors in Ebbw Vale
- Insulated roller shutter doors in Aberdare
- Insulated roller shutter doors in Abergavenny
- Insulated roller shutter doors in Ystradgynlais
- Insulated roller shutter doors in Llandrindod Wells
Other services in Brecon
- Dock shelters and seals
- Impact traffic doors
- Industrial door repairs
- High-speed doors
- Complete loading bays
- Fire shutters
- Planned maintenance contracts
- Industrial door replacement
More about Insulated roller shutter doors · industrial doors in Brecon. Last updated 19 October 2026.