Quick answer
We can fit foam-filled insulated roller doors in Shrewsbury and across Shropshire, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.
- Town
- Shrewsbury
- Postcode district
- SY1
- Area
- Shropshire
- Survey
- Free for new installations
Options that matter on site
- Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
- Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Jobs we can carry out
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Powered door rules that apply in Shrewsbury
Shrewsbury is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does an insulated roller shutter door cost in Shrewsbury?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Shrewsbury opening free of charge and then put a fixed price in writing.
Will an insulated roller door cut heating bills at our Shrewsbury premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Can you replace our old roller shutter in Shrewsbury with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Insulated roller shutter doors near Shrewsbury
Shrewsbury is in the SY1 postcode district in Shropshire. We also cover Wellington, Telford, Oswestry.
- Insulated roller shutter doors in Wellington
- Insulated roller shutter doors in Telford
- Insulated roller shutter doors in Oswestry
- Insulated roller shutter doors in Bridgnorth
- Insulated roller shutter doors in Stafford
- Insulated roller shutter doors in Wolverhampton
Other services in Shrewsbury
- High-speed doors
- Dock leveller and loading bay repairs
- Steel personnel and fire exit doors
- Industrial door motor replacement
- Dock levellers
- Sectional overhead doors
- Industrial door repairs
- Complete loading bays
More about Insulated roller shutter doors · industrial doors in Shrewsbury. Last updated 19 October 2026.