Insulated roller shutter doors in Wellington

The short version

Insulated roller doors suit premises in Wellington that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Wellington
Postcode district: TF1
Area: Shropshire
Survey: Free for new installations

Options that matter on site

Electric drive. Tubular or external geared motors with a manual override for power cuts.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.

Typical scopes of work

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Powered door rules that apply in Wellington

Wellington is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Sites in and around Wellington vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

How much does an insulated roller shutter door cost in Wellington?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Wellington opening free of charge and then put a fixed price in writing.

Do you repair insulated roller doors across Shropshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Shropshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Is there enough headroom for an insulated roller door at our Wellington unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Wellington

Wellington is in the TF1 postcode district in Shropshire. We also cover Telford, Shrewsbury, Bridgnorth.

Other services in Wellington

More about Insulated roller shutter doors · industrial doors in Wellington. Last updated 19 October 2026.